Home » Products » Air Blow Guns – high blowing force » 755-L-H
755-L
SILVENT 755-L: with a stainless steel Laval nozzle. A core stream traveling at supersonic speed surrounded by a protective sheath of air moving parallel to the central jet makes optimal use of your compressed air. Around the Laval orifice there are divergent slots that generate a quiet, powerful and laminar air stream. The blowing force is approximately 5 times that of an ordinary air blow gun. Despite the high blowing force, both the noise level and air consumption are low. This air blow gun is frequently used in the glass industry, paper mills, foundries, steel mills etc.
Technical data
Replace open pipe Ø (mm)10
Blowing force (N)16.0
Air consumption (Nm³/h)94
Sound level (dB(A))92.6
Nozzle technologyLaval
Material (nozzle)1.4305 (303)
ConnectionG 1/2"
Connection typeFemale
Weight (g)507
Max temp (°C)70
Max op. pressure (MPa)0.7
Benefits when replacing an open pipe
Replace open pipe Ø (mm)10
Noise reduction19 [dB(A)]73%
Energy savings91 [Nm³/h]49%
Material specification: Zn ZP0410 EN12844, EN 10088-3, EN 10130 DC04, NBR, PUR, polyolefin, EN 1.0718, EN 1.4305
Technical data
Replace open pipe Ø (inch)3/8
Blowing force3.5 lbs
Air consumption (scfm)55.3
Sound level (dB(A))92.6
Nozzle technologyLaval
Material (nozzle)1.4305 (303)
ConnectionNPT 1/2"
Connection typeFemale
Weight (lbs)1.118
Max temp. (°F)158
Max op. pressure (psi)100
Benefits when replacing an open pipe
Replace open pipe Ø (inch)3/8
Noise reduction19 [dB(A)]73%
Energy savings53.6 [scfm]49%
Material specification: Zn ZP0410 EN12844, EN 10088-3, EN 10130 DC04, NBR, PUR, polyolefin, EN 1.0718, EN 1.4305
Technical specifications
See basic information about the technical data. Read more
Instructions for use
Read Silvent Group General Instructions for Use before you install the product.