Home » Products » Air Blow Guns – high blowing force » 2053-L-150
2053-L
SILVENT 2053-L is a air blow gun that is equipped with a Laval nozzle. The blowing force is more than 3 times stronger than that of an ordinary compressed air blow gun. The compressed air is optimally used in this Laval nozzle by surrounding a core of air traveling at supersonic speed with a protective film of air moving parallel to the central air jet. Diverging slits around the Laval hole provide quiet, strong and laminar air streams. Despite the high blowing force both the sound level and energy consumption are low.
Technical data
Replace open pipe Ø (mm)8
Blowing force (N)10.6
Air consumption (Nm³/h)60
Sound level (dB(A))91
Nozzle technologyLaval
Material (nozzle)1.4305 (303)
ConnectionG 3/8"
Connection typeFemale
Weight (g)318
Max temp (°C)70
Max op. pressure (MPa)0.7
Benefits when replacing an open pipe
Replace open pipe Ø (mm)8
Noise reduction17 [dB(A)]69%
Energy savings58 [Nm³/h]49%
Material specification: EN AB 46000, NBR/PTFE, EN AW 2011 T8, EN 1.4305, PC, TPU, PUR, EN 10088-3 , Zytel HTN FG52G35 HSL BK011, EN AW 6060, EN 1.4305
Technical data
Replace open pipe Ø (inch)5/16
Blowing force2.3 lbs
Air consumption (scfm)35.3
Sound level (dB(A))91
Nozzle technologyLaval
Material (nozzle)1.4305 (303)
ConnectionNPT 3/8"
Connection typeFemale
Weight (lbs)0.701
Max temp. (°F)158
Max op. pressure (psi)100
Benefits when replacing an open pipe
Replace open pipe Ø (inch)5/16
Noise reduction17 [dB(A)]69%
Energy savings34.1 [scfm]49%
Material specification: EN AB 46000, NBR/PTFE, EN AW 2011 T8, EN 1.4305, PC, TPU, PUR, EN 10088-3 , Zytel HTN FG52G35 HSL BK011, EN AW 6060, EN 1.4305
Technical specifications
See basic information about the technical data. Read more
Instructions for use
Read Silvent Group General Instructions for Use before you install the product.